Category: 08 Project Management

08 Project Management Fab Academy Providence -Year I - Student Projects Tutorials

Very Basic Beginner Assembly Tutorial III: How to Use Avrdude

Post author By Anna Kaziunas France
Post date August 19, 2010
No Comments on Very Basic Beginner Assembly Tutorial III: How to Use Avrdude

First – If you have not already compiled your program

See the Very Basic Beginner Assembly Tutorial: How to Use Gavrasm to Compile a .asm File

If you have compiled your program (created a .hex file)

*Note: If you do not yet have avrdude installed or if you are a windows user and need avr studio – see Lady Ada’s tutorials for detailed information on how to download, setup, configure and use these programs. Lady Ada’s AVR software installation tutorial

Once your AVR software tools are installed:

Again – Lady Ada has excellent detailed tutorials on how to use avrdude check the out for details on what the all the commands are and what they do – I will just give the very basics here to help you program a chip.

1. Open your command line interface and navigate to the directory that contains the file you want to flash to the microcontroller.

2. Connect your AVR programmer to your computer – I prefer the usbtiny (also created by Lady Ada and available at a reasonable price from adafruit studios).

3. If your board has an resonator / external clock you will need to set the fuses first before attempting to program the microcontroller. You must do this first. However, once the fuses are set – you do not have to do it again. The fuses are set only once. You can reprogram the microcontroller as many times as you want after the fuses are set.

example to set fuses:

avrdude -p t44 -c bsd -U lfuse:w:0x7E:m

parts used in this example:
– 20 MHz clock
– bsd cable programmer
– microcontroller – attiny44

You need to change the parts in the code above to match the parts you are using in order for it to work. Ask you instructor if you are confused.

example to set fuses:

avrdude -p t45 -c usbtiny -U lfuse:w:0x7E:m

parts used in this example:

– 10 MHz clock
– usbtiny programmer
– microcontroller – attiny45

4. If you have set the fuses already or if your board does not have an external clock – here is how to flash / program the microcontroller.

generic example to flash microcontroller:

avrdude -p microcontroller -c programmer -U flash:w:program.hex

example with actual data:

avrdude -p t44 -c usbtiny -U flash:w:freqrx3.hex

parts used in this example:

– usbtiny programmer
– microcontroller – attiny44

Tags avrdude

08 Project Management Fab Academy AS220 - Providence, RI Fab Academy Providence -Year I - Student Projects Tutorials

Very Basic Beginner Assembly Tutorial II: How to Use Gavrasm to Compile a .asm File

Post author By Anna Kaziunas France
Post date August 19, 2010
2 Comments on Very Basic Beginner Assembly Tutorial II: How to Use Gavrasm to Compile a .asm File

This tutorial instructs you on how to compile an assembly language file (.asm) into a .hex file using Gavrasm (Gerd’s AVR Assembler). the .hex file can then be uploaded to a AVR microntroller using Avrdude (or another program.)

1. Check to see if you have Gavrasm installed.

Open your command line interface and type:

gavrasm

If Gavrasm is installed you will see (your version number may vary):

+------------------------------------------------------------+
| gavrasm gerd's AVR assembler Version 2.5 (C)2010 by DG4FAC |
+------------------------------------------------------------+

2. If Gavrasm is not installed you will get an error.

You can download and install Gavrasm for Unix or Windows: http://www.avr-asm-tutorial.net/gavrasm/index_en.html

*Note: if you are running a Mac OS (especially a pre-intel / PPC – Power PC Mac see my tutorial on where to get the compiled Gavrasm for the Mac OS.

3. If Gavrasm is installed — or once you get it installed:

A. navigate to the directory where the file that you want to compile is located.

– if you are unfamilar with unix commands:

To list the files in your current directory type:

ls

To change directory / navigate into a specific listed directory type (where directory name is the name of the directory you want to move to):

cd directoryname

To move upwards in the directory tree structure type”

cd ..

If you know the pathname of the directory that you want – type in the pathname of the directory preceded by “cd”

ex:

cd  /Desktop/mydirectory/mydirectory2

you can find more about general unix commands b doing a general internet search.

B. After navigating the correct directory – type:

gavrasm filename.asm

where “filename.asm” is the name of the assembly file you want to compile.

4. Gavrasm will compile the file for you and produce a .hex file of the same name as the .asm file.

Warnings:

Gavrasm will inform you if there are warnings. For the most part you can ignore the warnings. Ask your Fab Academy instructor if they are something you should be concerned about.

Errors:

If there are errors in compiling your file – Gavrasm will refuse to create a .hex file and will throw a bunch of error messages at you. Use these error messages to fix the problem.

If you don’t understand them – google the error or look at the datasheet for the microcontroller that you are using. Ask your instructor if you are confused – odds are they have encountered this many times.

You must fix the errors in the program before it will compile.

5. You can now use your AVR programmer and Avrdude to flash your microcontroller with the .hex file you just created

— See Very Basic Beginner Assembly Tutorial III: How to Use Avrdude

Tags Gavrasm

08 Project Management Fab Academy AS220 - Providence, RI Fab Academy Providence -Year I - Student Projects Tutorials

Very Basic Assembly Tutorial I: Where to Get Gavrasm for the Mac OS

Post author By Anna Kaziunas France
Post date August 19, 2010
No Comments on Very Basic Assembly Tutorial I: Where to Get Gavrasm for the Mac OS

Having problems compiling Gavrasm on your Mac? Here is where to get Gavrasm (Gerd’s AVR Assembler) pre-compiled binaries for the Mac OS.

Windows & Linux

Pre-compiled binaries for Windows and Linux are available from the Gavrasm homepage.

Tags Gavrasm

08 Project Management Fab Academy AS220 - Providence, RI Fab Academy Providence -Year I - Student Projects

Building Lab & Personal Pages

Post author By Anna Kaziunas France
Post date June 19, 2010
No Comments on Building Lab & Personal Pages

The Fab Academy Assignment

Build lab and personal pages in the class archive with your Fall work
Create “make anything’ home page / project page. See other posts in this blog and http://www.kaziunas.com/site/puppetmaster.php
Contribute to tutorials in the class archive (see tutorials category and posts)
Prepare a schedule for your final project (PuppetMaster).

First – If you have not already compiled your program

If you have compiled your program (created a .hex file)

Once your AVR software tools are installed:

example to set fuses:

example to set fuses:

4. If you have set the fuses already or if your board does not have an external clock – here is how to flash / program the microcontroller.

generic example to flash microcontroller:

example with actual data:

1. Check to see if you have Gavrasm installed.

2. If Gavrasm is not installed you will get an error.

3. If Gavrasm is installed — or once you get it installed:

4. Gavrasm will compile the file for you and produce a .hex file of the same name as the .asm file.

Warnings:

Errors:

5. You can now use your AVR programmer and Avrdude to flash your microcontroller with the .hex file you just created

OS X 10.4.11 – Tiger (Power PC)

OS X 10.5.x – Leopard

OS X 10.6.x – Snow Leopard

Windows & Linux

The Fab Academy Assignment